English
Main ingredients
Ester based water-based lubricants for drilling fluids are lubricants made from vegetable oil and synthetic hydrocarbons, and processed through special production processes to produce an efficient lubricant that can truly dissolve in water.
Nature and Use
The product is a uniform and flowable liquid, effectively reducing the friction between the drill pipe and the wellbore, drill pipe and casing, and drill pipe and mud during the drilling process. Especially suitable for lubrication in horizontal wells, large displacement wells, window wells, and some difficult wells.
Specification
|
Project |
Indicators |
|||
|
Ⅰtype |
Ⅱtype |
Ⅲtype |
||
|
Appearance |
Uniformly Flowable Liquid |
|||
|
Condensation point a ，℃ |
≤-5 |
|||
|
Ester content， % |
≥40.0 |
|||
|
Apparent viscosity increase value， mPa · s |
≤3.0 |
|||
|
Bubble rate， % |
≤10.0 |
|||
|
Reduction rate of lubrication coefficient， % |
Freshwater slurry（120℃/16h） ≥ |
90.0 |
— |
90.0 |
|
0.04 Saltwater slurry（120℃/16h） ≥ |
75.0 |
— |
— |
|
|
Saturated saline slurry（180℃/16h） ≥ |
|
60.0 |
— |
|
|
2.0g/cm3 High density slurry（150℃/16h） ≥ |
— |
— |
30.0 |
|
|
Fluorescence level b ，level ≤ |
4 |
|||
|
Environmental performance (LC50 value) c ，mg/L ≥ |
30000 |
|||
|
Note: Type I is a regular ester lubricant, Type II is a high-temperature and saturated salt resistant ester lubricant, and Type III is an ester lubricant for high-density drilling fluids. |
||||
|
A、The pour point index is limited to the requirements of drilling fluid lubricants for construction in cold regions. B、The fluorescence level indicator is limited to low fluorescence or non fluorescence lubricants used in drilling fluids. C、The environmental performance (LC50 value) index is limited to environmentally friendly lubricants used in drilling fluids. |
||||
Product features
Usage
Just mix it directly into the drilling fluid. Recommended dosage: 1.0% -2.0%.
